5.2 weird noise
check this. it makes a rattley sound on the drivers side. auto trans linkage bushings - grease hell out of them.
https://dodgeforum.com/m_657737/tm.htm
https://dodgeforum.com/m_657737/tm.htm
dhvaughanthanks for the info... i found that out a couple months ago. pisses me off. i grease the hell out of it and sooner or later it comes back. i was thinking that there should be some kind of bushing in there.
what does the hood going side to side have to do with it, though?
what does the hood going side to side have to do with it, though?
the solonid is on the right front fender if you hold it you can fell it clicking. it is part of the emissions system. this is not on all the time so if you only hear it from time to time it may be it.
for you guys with 00-01 trucks with the shift linkage knock i have the bullitin with the updated parts to fix that noise. e-mail me and i will send you a copy of it.
for you guys with 00-01 trucks with the shift linkage knock i have the bullitin with the updated parts to fix that noise. e-mail me and i will send you a copy of it.
ORIGINAL: timwag2001
what does the hood going side to side have to do with it, though?
what does the hood going side to side have to do with it, though?
no other up/down motions duplicated it right while it was sitting still.
but then i'd get in and start driving and squeak squeak squeak.
Mine doesn't squeak at all its a
. And yes Timwag I can feel it on the floorboard. I have some time today I'm gunna check it out. Also you can only hear it in park.
knock knock click click clickety clack..
yup. it's so bad i can feel it in my column shifter. its the shift linkage that goes to your tranny.
if you get under your truck you'll see it come down to the tranny and it bolts to the underside of the floor.
take a look at it closely and you'll notice that one of the places that it connects doesnt have any bushings or anything inbetween, its metal on metal. grease the hell out of it. it'll help for a little while.
if you get under your truck you'll see it come down to the tranny and it bolts to the underside of the floor.
take a look at it closely and you'll notice that one of the places that it connects doesnt have any bushings or anything inbetween, its metal on metal. grease the hell out of it. it'll help for a little while.
ORIGINAL: timwag2001
i was thinking that there should be some kind of bushing in there.
i was thinking that there should be some kind of bushing in there.



