custom switchboard (pics)
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
well i dont smoke and no one else is allowed to smoke in my truck to i decided to remove my ash tray and mold a piece of diamond plate to fit in its place to use as a switch panel, i mount the horn button for my air horn (see my other thread) a switch for my underdash neons, a switch for my lights in the bumper(need to be hooked up) and a switch for the lights on my rollbar (also need to be hooked up) and some alarm the PO put in. now i need a new piece of trim cause mine looks like swiss cheese
i was able to use stock screw locations to hold it in place so i can always but the ash tray back in if i sell the truck
![Name: 102_1153.jpg
Views: 1772
Size: 125.0 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/85973d1501376705-custom-switchboard-pics-102_1153.jpg)
i was able to use stock screw locations to hold it in place so i can always but the ash tray back in if i sell the truck
![Name: 102_1153.jpg
Views: 1772
Size: 125.0 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/85973d1501376705-custom-switchboard-pics-102_1153.jpg)
![Name: 102_1154.jpg
Views: 1760
Size: 149.6 KB](https://dodgeforum.com/forum/attachments/2nd-gen-ram-tech/85974d1501376705-custom-switchboard-pics-102_1154.jpg)
#2
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
holy crap dude that looks pretty wicked! good job!
I've been wantin to build a switch holder too, I was thinkin about doin mine up in the overhead console....
I smoke all the time in my truck, but never use the ashtray, it's a cubbyhole for me to store ****, like pack of smokes, cd player remote, etc...
![Smile](https://dodgeforum.com/forum/images/smilies/smile.gif)
I smoke all the time in my truck, but never use the ashtray, it's a cubbyhole for me to store ****, like pack of smokes, cd player remote, etc...
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
pretty insane, i was just measuring my opening today to do the exact same thing while ive got my dash apart doing my viper install.... i have 2 switches for lights, the neutral safety switch for the viper system, as well as a place to mount the microphone for the glass break sensor, and i figured id do the same thing since the ash tray is never used... glad to see what it would look like... looks good
let me know what you do about your "swiss cheese" (lol) dash piece... ill have the same problem if i re-locate my switches
let me know what you do about your "swiss cheese" (lol) dash piece... ill have the same problem if i re-locate my switches
#5
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Same...I'm going to be looking on ebay here one day for some new interior pieces. The same dash pieces plus my transfer case shifter have holes.
#7
Trending Topics
#10
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
i just took the ash tray out laid it on the diamond plate traced the width gave some extra length, put a piece of scrap from my headliner taped to a hammer and used the top of one of my vices to get the curve, took a while but i got them, put some carpet ove the vice for the second bend.
that cord is some security thing the PO put in, if you remove that little chip the truck wont start
that cord is some security thing the PO put in, if you remove that little chip the truck wont start