it doesnt look as good in black and white

 

Actually drew I like this one... do you have it bigger?

[IMG]local://upfiles/56764/618687B583D74F9A8C63CEA58B8A7029.jpg[/IMG]

oh and I'm gonnna go check on the size in a minute. Any recomendations on size would be good too.

 

give me a sec, ill resize it


edit:
here u go, click to view



[IMG]local://upfiles/46457/1A5DC523E8DD4DDE886A0DBEC19463C4.jpg[/IMG]

 

Okay so I just measured on my truck... If I do it on the Tailgate I have 21inches vertically to work with... so I'm thinkin maybe like 13inches(long) X 18 inches (wide)... but the other problem with the tailgate is that I either have to get two on either side of the truck or the Tailgate handle gets in the way... Any thoughts?

I could Also do it on the hood but Idk what a good size is for the hood

 

dont do it on the hood

 

For the hood? Big. You'll probably want to fill it.

I would try to center it on your tailgate, if you go that route. There might be enough width between the horns for the tailgate handle.

Measure the width of the tailgate handle, the height of the tailgate, and tell klings that you want the design big enough for the tailgate handle to fit in the space between the horns, and tall enough to fill the tailgate (mostly...you want some space on the top and bottom).

 

Okay going out to measure again...brb

 

Okay handle measured its about 3 1/2inches X 7 7/8 inches... so... klings if you can do that with this then let me know and give me a quote... I want these colors

[IMG]local://upfiles/56764/714A46DC7E3B4B78891E5E0640009931.jpg[/IMG]

[IMG]local://upfiles/56764/BAB11B7E59464FEE81C60EBB2DC4F865.jpg[/IMG]

[IMG]local://upfiles/56764/EFF8A68B0A8D4CB4862034145EA338D0.jpg[/IMG]

 

this doesnt look great, its rough, but when the actual decal is made and on, it will look a lot clearer and better

oh, i took care of that emblem for u too...if i were u, id lose the dakota slt emblems too...i was actually workin on this before u posted the pics above




[IMG]local://upfiles/46457/5B22B5B7B86245A79B86A804CEBA0623.jpg[/IMG]

 

also, if u goin with a black theme, id paint your bumper too

here u go with a black bumper, again, i only spent about 2 minutes changing bumper color, so its rough




[IMG]local://upfiles/46457/CBC797039F0A43DBAAF6F3EB59B6FD02.jpg[/IMG]



edit
again, very rough, but i just removed the dakota slt badges




[IMG]local://upfiles/46457/DBF753DCBE864C0497E9A00C9D36314E.jpg[/IMG]