Im trying to install some speakers into my 2007 Dakota, the rear speakers are proving to be a pain. I'm using a T50 to try and remove the seat belts as directed however they won't come loose. I talked to the dealer today and they said they use loctite to put those bolts in there and that I have to come to them to have it removed. I hate to do that I'd like to do this myself if possible but not having an air gun and not wanting to strip the bolt I see little other choice. Any suggestions or people who have worked them loose in the past?

 

Try, REALLY hard...

It takes a lot of muscle, but I've done it...

That, or get a breaker bar, then it won't take really any muscle...

 

You just have to put some muscle into them. I took mine out using a large allen wrench that fit in there, I had all the pics taken to write up rear speaker change for the club cabs to go with my front speaker DIY but I forgot to back them up when I reinstalled windows

 

Look at that, a dealer once again offering to lighten your pockets, haha, nice. Like they all said muscles and atrusty breaker bar should do it.

 

Trust me, Eric, I can tear a vehicle apart, in under two hours, give me, a set of sockets, an philips and flathead screwdriver, and a breaker bar, I can tear it apart....

Getting it back together, however....

 

Just dont slip, you may need your fingers, atleast I do!

 

Err.. that came out wrong, atleast I need my own fingers to be productive in this world! There!

 

sure...there are lots of things out there that can be "productive" and those 10 digits cango along with getting...er...aHead in life...

*sorry couldn't help but keep that going