Subwoofer project.
Thread Starter
|
Amateur
Joined: Sep 2011
Posts: 41
Likes: 1
From: Russellville, AR
Subwoofer project.
I have a little project that I'm working on. I have seen that Kicker makes a Comp VT subwoofer in an enclosure that will fit behind the passenger-rear seat of the QC Daks with a little bit of a modification. I removed the metal arch bracket that the jack slides under with a little bit of cutting and pulling, then I removed the middle seatbelt assembly. Leaving me with This:
IMG_20111009_143704.jpg
All that's left to do is get rid of that hideous red guide that the seatbelt runs through somehow. Oh, and not to mention purchase the sub. They make a 10" and a 12", both of which will fit. Here is the link so you can check them out. http://www.crutchfield.com/g_510/Enc...&price=220-290
I'm planning on going with the 12 for deeper bass, as soon as I sell my Kicker Comp VR 12 that I have in a ported box in my back seat. I hope this info helps. I'll post a pic as soon as I can of the finished product.
IMG_20111009_143704.jpg
All that's left to do is get rid of that hideous red guide that the seatbelt runs through somehow. Oh, and not to mention purchase the sub. They make a 10" and a 12", both of which will fit. Here is the link so you can check them out. http://www.crutchfield.com/g_510/Enc...&price=220-290
I'm planning on going with the 12 for deeper bass, as soon as I sell my Kicker Comp VR 12 that I have in a ported box in my back seat. I hope this info helps. I'll post a pic as soon as I can of the finished product.