Need A-pilar wiring diagram for 2006 Dakota
#1
Need A-pilar wiring diagram for 2006 Dakota
I have a 2006 QC SLT Dakota and I'm trying to figure out the wiring located in the passenger A-Pilar. My existing wiring is for the standard dome lights, only three wires:
I am adding in the overhead console and I'm trying to figure out which wires to tap in to. I'm not sure which wires are for CAN B+ and CAN B-.
I ASSUME that its white and white/orange because the wiring diagram I was able to find (courtesy of user DodgeCares) labels them as White Twisted and White Twisted Orange:
I also have the auto-dimming mirror and wonder which wire in the harness (or the stock dome light harness) is for the Backup Lamp feed since the mirror pins are:
Pos 1. DB/WT – Fused Ignition Switch Output (Run-Start)
Pos 2. BK – Ground
Pos 3. VT/BK – Backup Lamp Feed
Your help is much appreciated.
I am adding in the overhead console and I'm trying to figure out which wires to tap in to. I'm not sure which wires are for CAN B+ and CAN B-.
I ASSUME that its white and white/orange because the wiring diagram I was able to find (courtesy of user DodgeCares) labels them as White Twisted and White Twisted Orange:
I also have the auto-dimming mirror and wonder which wire in the harness (or the stock dome light harness) is for the Backup Lamp feed since the mirror pins are:
Pos 1. DB/WT – Fused Ignition Switch Output (Run-Start)
Pos 2. BK – Ground
Pos 3. VT/BK – Backup Lamp Feed
Your help is much appreciated.