3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

Brake Caliper Keeps Seizing

Thread Tools
 
Search this Thread
 
Old Dec 24, 2018 | 10:38 AM
  #1  
Lbitchue's Avatar
Lbitchue
Thread Starter
|
Registered User
Joined: Jun 2017
Posts: 5
Likes: 0
Default Brake Caliper Keeps Seizing

Hey there,

I've got a 2007 4x4 Dakota with 150,000 miles on it. I continue to have issues with my front passenger side brake caliper seizing. The caliper has been replaced twice in the past two years, and the brake line was replaced with it on the last fix. A little over a year later, that same side is seizing again, and I have no idea what else could be causing this issue. The truck is only equipped with 2 wheel abs, so I doubt that is an issue. Any thoughts?

Thanks.
 
Reply
Old Dec 24, 2018 | 07:39 PM
  #2  
19dhyer's Avatar
19dhyer
Amateur
Joined: May 2018
Posts: 35
Likes: 0
From: Utah
Default

You have to make sure you have a very liberal amount of silicone paste on several of the brake components. Also have them check the valves in the abs system. Abs will be on the front wheels because the majority of braking is done on the front wheels.
 
Reply
Old Dec 24, 2018 | 07:43 PM
  #3  
stetson's Avatar
stetson
Rookie
Joined: Aug 2014
Posts: 74
Likes: 0
From: Florida
Default

check your wheel bearings for play and rotors for warpage.
 
Reply
Old Dec 25, 2018 | 03:41 PM
  #4  
FaceDeAce's Avatar
FaceDeAce
Veteran
5 Year Member
Photogenic
Photoriffic
Liked
Joined: Dec 2017
Posts: 352
Likes: 11
From: Canada West
Default

Brakes require servicing roughly every 4 months to keep linkages and slide pins clean, free moving, and lubricated. Brakes are not looked at only when there is a problem or it is time for new pads or rotors or callipers. They need attention a couple of times per year to keep them operating properly, optimally, and get the longest use out of the components.
 
Reply




All times are GMT -4. The time now is 12:32 PM.