The thing cost me 13 dollars. Gotta love companies needing templates!

Stock on top. New italian leather boot on bottom!

[IMG]local://upfiles/768/F02D629FBBF54A548CFBE481253D280E.jpg[/IMG]

[IMG]local://upfiles/768/01A92A93E75A4F1FBBCCC3280AD114B1.jpg[/IMG]

[IMG]local://upfiles/768/A83060125DC8428EA330AADE95AE60C6.jpg[/IMG]

[IMG]local://upfiles/768/8F3922BD8B554F74AB5B022A7A9E580A.jpg[/IMG]

 

awesome stuff! i wonder if I could get something similar in black and blue to replace the rubber thingy i have on my steering column shifter

 

I'm sure you could. Figuring out how to remove it is the problem.

 

Remove the three screws on the bottom side of the column cover. You will need a long shaft # 20 torx screwdriver, five bucks at schucks, pull the column halfs apart and lift out the rubber boot. To put back in, fasten the column halfs together and pop the boot back in. VERY FIRST FIRST STEP. Disconnect negative battery cable then wait 2 minutes. You do not want the air bag to deploy while working around in this area. Otherwise your last words might be; "Hey watch this".

 

yeah i figured out how to remove it a while back, adding a leather one would be awesome though...hmmm even one to match the rest of my leather interior, that'd be awesome! hey i'm going to need the e-mail again for the place to contact, I was at work and forgot to bring it home on disk.

 

Looks good and I'm sure it is cheeper than the stock piece.