Air conditioning not cold
2013 RT with less than 3,000 miles.
It was 100 deg today, and air set all the way down to "LO" with fan on full speed, car still not cool enough.Girlfriend who normally doesn't like air too cold, was warm too.
I've suspected there was a problem earlier ,because I would have to turn the air on full blast to cool the car on a 75 deg day.
Anyone else have any problems with theirs?
Any Techs out there? What temps should I see coming out the vents?
It was 100 deg today, and air set all the way down to "LO" with fan on full speed, car still not cool enough.Girlfriend who normally doesn't like air too cold, was warm too.
I've suspected there was a problem earlier ,because I would have to turn the air on full blast to cool the car on a 75 deg day.
Anyone else have any problems with theirs?
Any Techs out there? What temps should I see coming out the vents?
It should be between 48-65 degrees Fahrenheit depending on the outside ambient temp. My suggestion is to let the dealership test if for you if you think it is not operating up to snuff.
Last edited by DodgeCares; May 14, 2013 at 12:45 PM.
I had to take my 2012 v6 DD in because of not cooling and the problem was the freon was underfilled from the factory. When they evac all the freon it came up short from what it was supposed to be. They refilled it and topped it off and has been fine ever since
Trending Topics
An overfill situation could cause the problem as well. Best to have the dealership take a look in this case.
Success
Air at vent now 50 deg.
Dealer said it was low on freon.
I looked up and saw a black D being washed, asked if they wash all cars, Guy says NO, we ask first. Me.....good because I don't want mine washed.
Get a closer look.....dang, it's Mine. Now I need to polish out the swirl marks LOL
Air at vent now 50 deg.
Dealer said it was low on freon.
I looked up and saw a black D being washed, asked if they wash all cars, Guy says NO, we ask first. Me.....good because I don't want mine washed.
Get a closer look.....dang, it's Mine. Now I need to polish out the swirl marks LOL




