22 x 10.5" wheels mounted **pics**
Thread Starter
|
Amateur
Joined: Mar 2014
Posts: 44
Likes: 0
From: AZ
Had to delete original pics in order to upload additional pics on page 3. Exceeded quota.
Veteran
Joined: Dec 2007
Posts: 268
Likes: 0
From: Joliet, IL
Use photobucket so you don't have to.
And as long as you don't delete the photos from your account(7gigs I think free) they will be there for all the others to see for a long long time.
Chris
Amateur
Joined: May 2014
Posts: 27
Likes: 0
From: West Hills, CA
Thanks all!
The grill, fender stripes, and rear bumper were all wrapped in vinyl. I would like to take the vinyl off the grill and have it painted for a cleaner look. Because of the bends and turns, there are sections of vinyl. Not noticeable to the untrained eye but I'm picky. Still debating on whether to have the roof wrapped or not.
The grill, fender stripes, and rear bumper were all wrapped in vinyl. I would like to take the vinyl off the grill and have it painted for a cleaner look. Because of the bends and turns, there are sections of vinyl. Not noticeable to the untrained eye but I'm picky. Still debating on whether to have the roof wrapped or not.
Thread Starter
|
Amateur
Joined: Mar 2014
Posts: 44
Likes: 0
From: AZ
Had it done at a local vehicle wrap shop. They couldn't figure out how to remove the grill so it was left on while they did it.
Your Redline D will look real good if you decide to black out the grill and wheels!
All Star
Joined: Jan 2013
Posts: 872
Likes: 0
From: JACKSONVILLE, FLORIDA
I stopped by a tint place, just to wrap the grill they wanted $500, I laughed at them. Spent about 45 minutes masking yesterday, another hour or so with 8 coats and the thing came out great with plastidip. At least I know too,any chip or issue etc down the road, I just just quick hit it again and call it a day.
All Star
Joined: Jan 2013
Posts: 872
Likes: 0
From: JACKSONVILLE, FLORIDA
The advertised Vinyl work Craig, they wanted $450 for tint, even though have a regular place I go to will do it for $220, just haven't had the time to get it done yet, still factory colors man.
Thread Starter
|
Amateur
Joined: Mar 2014
Posts: 44
Likes: 0
From: AZ
So far so good, didn't have to do any customizing and no rubbing.