3rd Gen Durango 2011+ models

Electrohydraulic Steering Pump

Thread Tools
 
Search this Thread
 
Old Jan 31, 2015 | 11:22 PM
  #1  
magnethead's Avatar
magnethead
Thread Starter
|
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default Electrohydraulic Steering Pump

The MR2 pumps are getting impossible to find....saw 12+ durangos and cherokees have them...supposedly V6 only?

Wanting to do the conversion on my Dak, but run the pump on a switch. I'm guessing the mopar pumps run off the CAN bus? Bet it's a brushless motor, too :/
 
Reply
Old Feb 1, 2015 | 08:39 AM
  #2  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

It does run off the computer, I believe the system has sensors to let computer know when to speed up pump and when to slow it down
STEVE
 
Reply
Old Feb 1, 2015 | 07:20 PM
  #3  
magnethead's Avatar
magnethead
Thread Starter
|
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

Originally Posted by FSTDANGO3
It does run off the computer, I believe the system has sensors to let computer know when to speed up pump and when to slow it down
STEVE
I know the older EHPS pumps ran 100% when power was applied with the data wires unhooked. I wonder if the mopar is the same...

Also wondering on if the hoses on my dak have the same fittings as the mopar EHPS....
 
Reply
Old Feb 1, 2015 | 08:18 PM
  #4  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

Hoses you can get fitting custom installed
STEVE
 
Reply
Old Feb 1, 2015 | 08:54 PM
  #5  
magnethead's Avatar
magnethead
Thread Starter
|
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

true. Now i just need to find out if it will run without the data cables...

Are there any links to FSM that may cover the EHPS wiring diagram?
 

Last edited by magnethead; Feb 1, 2015 at 09:08 PM.
Reply
Old Feb 8, 2015 | 11:14 PM
  #6  
magnethead's Avatar
magnethead
Thread Starter
|
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

I guess not?
 
Reply
Old Feb 9, 2015 | 06:57 PM
  #7  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

Sorry I dont have any access to these
STEVE
 
Reply




All times are GMT -4. The time now is 01:13 AM.