3rd Gen Durango 2011+ models

2014 Dies while driving - PCM replaced

Old Jan 7, 2023 | 02:20 AM
  #1  
dhyler3's Avatar
dhyler3
Thread Starter
|
Registered User
Joined: Jan 2023
Posts: 2
Likes: 0
From: Cali
Default 2014 Dies while driving - PCM replaced

My 2014 5.7 Hemi Durango Citadel continues to die while driving, turns over but won’t restart, and almost sounds like it’s out of gas. I took it to a dodge dealer who told me it needed a new PCM/ECM. I replaced the PCM flashed to my VIN. It wouldn’t restart until I reset the PCM (pulled fuse, turned key to “run”, let it chime after 5 secs, then second chime after 2 secs, then turn key to off position and reinsert the fuse) It started like normal and drove about 45 miles. After 45 miles it started doing everything again. I again reset the pcm and it drove for about 5 miles. Reset again and it drive another 5 miles. The last time it died it wouldn’t start at all.

Any ideas?? It appears that there has been similar issues and even recalls for this issue. But my vehicle doesn’t appear to have any outstanding recalls. I’m not sure what to try next.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:53 PM.