I am probably going to buy a 2007 Ram 1500 Big Horn with bucket seats and a center console, it has the silver instead of the woodgrain, I want to trade the silver that goes around the radio, the small pieces on the doors, and the piece on the center console for the same pieces in woodgrain that came on the 2006 models. I would like to swap even up, and I have instructions on how to remove them. Please let me know if someone is interested.

Thanks

 

You can get all them off Ebay for under $200 new shipped. I see used one's for half that price. Just in case nobody wants to trade.

 

Dirtydog-

where are you seeing used ones?

thanks

 

Egay....

 

Are there any aftermarket pieces for the bezel, doors and center console?

 

I'm still looking if anyone has seen any of the woodgrain around

 

can probably save some cash by getting the trim piece by piece. here's a dash bezel in woodgrain: http://cgi.ebay.com/ebaymotors/06-07...item3ca55760a8

here's a place on amazon that has custom colored trim kits: http://www.amazon.com/Dodge-Ram-2006...6680604&sr=8-7

here's a place that has the entire woodgrain trim kit new: http://www.customautotrim.com/dashki...ram/2006-2006/

google is your friend

 

I have an 06' Big Horn with the bucket seats and the center console. It does have the woodgrain but sorry I am not willing to sell. I do have a question though: Are the woodgrain panels on the doors molded in or will they remove?? I haven't removed any panels yet to check it out. Eventually I will be painting all of my woodgrain to match my Ram emblems on the outside (pictured in my signature). Thanks ahead of time! Oh, and good luck on finding those parts! Maybe post an ad on craigslist asking if anyone wants to swap parts in your local area!

 

Are you still looking for wood grain inserts? If so, send me a pic of what you have to trade. I have an '07 w/ wood grain, but prefer silver.

 

I painted all my woodgrain a silver color, and yes the panels on the doors come off, but you have to drill out the plastic part that is like melted down. Its kind of like a rivit type of thing. If you remove the door panel you will see from the back side. I drilled the plastic off and it poped right off. Then you need to use screws to hold it back in place, or you could glue it I guess, but I just used screws incase I needed to take it off again.