When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have been quoted $300-$400 for spray in. I will have mine done soon enough
Where at?
line-x here is $535 over the rails!!...that's why I still have the drop in
Herculiner makes a roll on application. You'd just have to prep the bed really well but I've heard good things about it. Auto stores sell it for $129ish I believe.
depending on bed length or if its sprayed otr or utr, $400-$500 is the normal price range for my area. That price is usually included with a same owner lifetime warranty. DIY is definitely cheaper. A side grinder with a sanding pad or a paint scraper will most likely get the paint spills up. If you do decide to do it yourself. You will need, painters tape or equivalent, 36 grit sand paper, lacquer thinner or any cleaning solvent to clean the bed after you have sanded and blown out the bed. Clean it twice to be sure. Just make sure there is no powdery substance left becuase It will make the liner chip up easily.
line-x here is $535 over the rails!!...that's why I still have the drop in
Herculiner makes a roll on application. You'd just have to prep the bed really well but I've heard good things about it. Auto stores sell it for $129ish I believe.
Northern florida. and damn I would never pay that unless I used my truck for a truck every day , day in and day out.