3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

02 4.7L went to the track

Old Aug 2, 2012 | 06:52 AM
  #31  
T-Rays's Avatar
T-Rays
Amateur
Joined: Jun 2012
Posts: 32
Likes: 0
From: Mobile, Al
Default

And my truck has a few mods.but nothing major
 
Reply
Old Aug 2, 2012 | 11:23 AM
  #32  
oefootball_70's Avatar
oefootball_70
Champion
Joined: Apr 2007
Posts: 4,829
Likes: 3
From: Olathe, KS
Default

IDK about impossible, but 8.8 1/8th would put you about mid 14's to 15's? Seems pretty close, but for a fairly stock 4.7 QC truck pretty good.

Not doubting you necessarily. Just figured that it was a Superchips time, thats what most people go by anymore.

fastest 4.7 times i can find...


14.29 @ 95.00 -2004 RCSB 4x2 4.7L N2O- Tajm
14.61 @ 93.14 -2008 RCSB 4x2 4.7L N/A- 05DodgeDakota
14.79 @ 92.90 -2004 RCSB 4x2 4.7L N/A- adamsredlines
14.80 @ 90.94 -2002 QCSB 4x2 4.7L N/A- 02_4pnt7
14.95 @ 90.41 -2002 RCSB 4x2 4.7L N/A- BIGBAD4.7
14.99 @ 89.29 -2002 QCSB 4x2 4.7L N/A- AIR_RAM

Those are all camed trucks, (if memory serves me right.)
 

Last edited by oefootball_70; Aug 2, 2012 at 11:26 AM.
Reply
Old Aug 2, 2012 | 11:28 AM
  #33  
oefootball_70's Avatar
oefootball_70
Champion
Joined: Apr 2007
Posts: 4,829
Likes: 3
From: Olathe, KS
Default

fastest 4.7 1/8 mile times

9.31 @ 76.XX -2002 QCSB 4x2 4.7L N/A- 02_4pnt7
9.33 @ 78.68 -2008 RCSB 4x2 4.7L N/A- 05DodgeDakota
9.35 @ 71.84 -2004 RCSB 4x2 4.7L N/A- adamsredlines
9.49 @ 71.83 -2002 QCSB 4x2 4.7L N/A- AIR_RAM
9.50 @ 72.48 -2002 RCSB 4x2 4.7L N/A- BIGBAD4.7
9.61 @ 72.62 -2002 RCSB 4x2 4.7L N/A- Jack ****
 
Reply
Old Aug 2, 2012 | 01:01 PM
  #34  
T-Rays's Avatar
T-Rays
Amateur
Joined: Jun 2012
Posts: 32
Likes: 0
From: Mobile, Al
Default

I run n2o(75), jba headers, k&n cold air, a superchip tuner that sucks, I'd like to get me some more goodies from air ram though.. I'm definitely not done with mods. My next will be gears or a dyno tune
 
Reply
Old Aug 2, 2012 | 01:03 PM
  #35  
T-Rays's Avatar
T-Rays
Amateur
Joined: Jun 2012
Posts: 32
Likes: 0
From: Mobile, Al
Default

Ill have to find a quarter mile track so I can you guys some better times
 
Reply
Old Aug 2, 2012 | 10:13 PM
  #36  
Old Man with a hemi's Avatar
Old Man with a hemi
Veteran
Joined: Jun 2012
Posts: 400
Likes: 0
From: Woodbury Tn
Default

Originally Posted by T-Rays
Those times are really com the strip ill try and load my time slip. I wouldn't bs you. I run at mobile dragway
I need to know what mods you are running to get that big heavy 4.7 quad cab to run much faster than my modded 06 hemi regular cab in the eighth mile. I have never seen any hemi truck with street mods ever break into the 8's. I'm not saying you can't do it, but I just want to know how, because any 8 in a quad cab, hemi or 4.7 is flying for a stock or lightly modded truck, I'm talking CAI, Tuner, Exhaust work. Now if you're juicing it, I can see how it's possible. According to every thing I've seen about trucks like yours, it should run somewhere in the tens, unless heavily modified. I actually hope your truck runs that good
 
Reply
Old Aug 2, 2012 | 10:45 PM
  #37  
T-Rays's Avatar
T-Rays
Amateur
Joined: Jun 2012
Posts: 32
Likes: 0
From: Mobile, Al
Default

I thought I posted it earlier. But I run n2o(75 shot) jba headers, k&n cold air, and one of the cheaper superchips that sucks in my opinion. If could find a way to get smaller wheels with a set of slicks I'd run even better
 
Reply
Old Aug 3, 2012 | 08:58 PM
  #38  
Old Man with a hemi's Avatar
Old Man with a hemi
Veteran
Joined: Jun 2012
Posts: 400
Likes: 0
From: Woodbury Tn
Question

Originally Posted by T-Rays
I thought I posted it earlier. But I run n2o(75 shot) jba headers, k&n cold air, and one of the cheaper superchips that sucks in my opinion. If could find a way to get smaller wheels with a set of slicks I'd run even better

T Rays, I run the same basic setup on an 06 regular cab hemi truck, minus the nitrous. I probably weigh 300 pounds less than your truck, and even with your 75 shot, that probably doesn't equal the hp or torque of the hemi motors, so how is it that you are running .5 faster than any of the fastest 1/8 mile times that the other guy listed. I also want to hear about this 594 foot time that nobody times other than your track. Also an 8.80 1/8 time translates into a 13.77 1/4 mile. Sorry T Rays, it just doesn't seem feasible to me with your limited mods. If I were you, I'd try another track to see if you can duplicate those times anywhere else. I'm not trying to be critical, but I have spent many years at the drags, and this story, and especially these times just seem impossible. And why would anyone give a 594 foot time.60 ft 330 660 1000 and 1320 is what everyone times, and I've never in my 60 years seen a 594 foot timer. If anyone else has, please chime in and tell us
 
Reply
Old Aug 3, 2012 | 09:25 PM
  #39  
gHEMImorePower's Avatar
gHEMImorePower
All Star
Joined: Nov 2011
Posts: 802
Likes: 0
From: Kennedale, Texas
Default

Where I live, there's a hemi qc that runs a 7 second 1/8 mile at the local strip. Seen it once and I don't know what mods he has. He's on youtube just search hemi silver ram kennedale
 
Reply
Old Aug 3, 2012 | 11:43 PM
  #40  
T-Rays's Avatar
T-Rays
Amateur
Joined: Jun 2012
Posts: 32
Likes: 0
From: Mobile, Al
Default

Mobile dragway has a web site. That's the only place I have ever ran so I wouldn't know what to tell you about the 594ft timer. What's your email and ill send you a picture of my time sheets. I can't get it to load for some reason. My truck is just a daily driver with a few mods no cams or anything. I can try and take some pictures tomorrow and show you what's under my hood
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:14 PM.