3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Superchips Flashpaq 3865 Help

Thread Tools
 
Search this Thread
 
Old May 30, 2011 | 10:12 AM
  #21  
SilsHemi's Avatar
SilsHemi
All Star
Joined: Dec 2005
Posts: 809
Likes: 0
From: GA
Default

Originally Posted by Firemedic812
well i wanted to try the 91 octane tune or on my programmer is says preformance tune and i cant seem to find that gas anywhere... wut the heck??? does superchips have a 93 octane tune?? i didnt see it when i updated my programmer.... and also when i get my gears it has a setting for Axle ratio.... wut would i set that two if i get 4.56 gears and how do i figure it out??? sry again new to all this but every bit helps.... thanks again
2008's have a 91 tune only. Just run 93 octane.

After you install your gears, set the gear ratio in the tuner to 4.56.


Sil
 
Reply
Old May 31, 2011 | 05:10 PM
  #22  
Firemedic812's Avatar
Firemedic812
Thread Starter
|
Registered User
Joined: Mar 2010
Posts: 13
Likes: 0
From: Riverview
Default Thanks

Hmmmmm... well in the manual it says to run 91 oct so i didnt know if 93 was ok cuz the only others i have really seen is 89 or 93 so im kinda SOL with the 91 oct... so there is no adverse effects of running 93oct vs 91oct?? any input Mr. Hammer??
 
Reply
Old May 31, 2011 | 08:46 PM
  #23  
SilsHemi's Avatar
SilsHemi
All Star
Joined: Dec 2005
Posts: 809
Likes: 0
From: GA
Default

Originally Posted by Firemedic812
Hmmmmm... well in the manual it says to run 91 oct so i didnt know if 93 was ok
It's perfectly fine. You have to run 91 or better with the 91 tune.

I've been running my 2008 on the 91 tune for three years. I run 93.


Sil
 
Reply




All times are GMT -4. The time now is 07:14 PM.