3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Stock body height

Old Sep 5, 2011 | 10:36 PM
  #1  
IndyRamMan's Avatar
IndyRamMan
Thread Starter
|
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
Default Stock body height

Can anyone tell me how much of a gap there is between the top of the wheel and the fender/bed wheel wells there is on the front and rear. I suspect my rear is either too high or my front is too low.
 
Reply
Old Sep 7, 2011 | 09:49 PM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Im too lifted to answer but if it were me i would find a truck in a parking lot or even at the dealer and measure
 
Reply
Old Sep 7, 2011 | 10:24 PM
  #3  
IndyRamMan's Avatar
IndyRamMan
Thread Starter
|
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
Default

Originally Posted by weedahoe
Im too lifted to answer but if it were me i would find a truck in a parking lot or even at the dealer and measure
lol that would be a sight...some guy with a measuring tape crowded around your truck as you look out from a store.
 
Reply
Old Sep 8, 2011 | 10:19 AM
  #4  
BadHazard's Avatar
BadHazard
Professional
Joined: Jul 2011
Posts: 136
Likes: 0
Default

Im interested too. Even a stock ground to rear bumper. I think mine is lifted in the rear but I don't know for sure. It has a block under the springs but Idk if that is stock.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:31 PM.