3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Its Purty ...

Thread Tools
 
Search this Thread
 
Old Sep 16, 2012 | 09:00 PM
  #1  
nkyhemi's Avatar
nkyhemi
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 86
Likes: 0
Default Its Purty ...

Will only upload 1 pic. Sorry Folks. Painted after 109k on it. Pulled the bed. Primed sealed in black. Chipped guarded the rockers all the way down. 3 coats of patriot blue. 3 coats of clear. sanded and buffed it. SEMed the front rear bumpers. The bed and step bars also the street flares(not on yet). New hood. Replaced the ford cab lights w/the lady bugs. thanks to my cousin for puttin alot time in and workin late( I was thier too) to get it done.
 

Last edited by nkyhemi; Sep 27, 2012 at 09:13 PM.
Reply
Old Sep 16, 2012 | 09:05 PM
  #2  
Nate_sorenson's Avatar
Nate_sorenson
Veteran
Joined: Jul 2011
Posts: 397
Likes: 0
From: Dickens, IA
Default

props, love the tires i would find some sort of aftermarket brand emblem or such to accent you grille with, only because it looks plain, not a bad thing though if its what youre going with.
 
Reply
Old Sep 16, 2012 | 09:24 PM
  #3  
Got_Mitch's Avatar
Got_Mitch
Professional
Joined: Aug 2008
Posts: 249
Likes: 0
From: Red Deer, Alberta
Default

thats exactly what i want to do with my truck black it all out with lineX on rockers, and bumpers. Going to get a black set of rims come next summer, and keep my 20s for the winter seasons.

looks awesome
 
Reply
Old Sep 16, 2012 | 09:50 PM
  #4  
nkyhemi's Avatar
nkyhemi
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 86
Likes: 0
Default

Might put some tinted Hella's for the grill but that would be it.
 
Reply
Old Sep 16, 2012 | 10:10 PM
  #5  
Got_Mitch's Avatar
Got_Mitch
Professional
Joined: Aug 2008
Posts: 249
Likes: 0
From: Red Deer, Alberta
Default

behind the grille?? thats what i want too.

I took off the wiring harness for the fog lights, Im assuming the OEM fog lights are 55 watt? So aftermarket LED fog/drivers light will just need some resistors. But mounting them will be the hardest part for me i think. I want them Mid grille, side to side and top to bottom, so ill need some sort of risers or spacers. And the mesh grille wont take away much light.
 
Reply
Old Sep 16, 2012 | 11:05 PM
  #6  
nkyhemi's Avatar
nkyhemi
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 86
Likes: 0
Default

Most likey i'll put a block in and run any aftermarket electronics off of that instead cutting into the factory hardware. The led's appeal me. mounting them shouldn't be difficult(tons of threads on it).
 
Reply
Old Sep 16, 2012 | 11:22 PM
  #7  
Nate_sorenson's Avatar
Nate_sorenson
Veteran
Joined: Jul 2011
Posts: 397
Likes: 0
From: Dickens, IA
Default

hmm always pondered behind the grille headlights, maybe i should get some and use niteshades!, keep up the good ideas/ compliments, btw nkyhemi how difficult was the cab light install, i want some!
 
Reply
Old Sep 16, 2012 | 11:38 PM
  #8  
nkyhemi's Avatar
nkyhemi
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 86
Likes: 0
Default

Not as bad as people think. Bad thing is the other set of lights are drilled different so i 've got another hole for each light. Take your time and do it right equal no problems.
 
Reply
Old Sep 17, 2012 | 12:03 AM
  #9  
Nate_sorenson's Avatar
Nate_sorenson
Veteran
Joined: Jul 2011
Posts: 397
Likes: 0
From: Dickens, IA
Default

awesome, i really want white leds instead of amber on mine but having a hard time finding them.
 
Reply
Old Sep 17, 2012 | 09:49 AM
  #10  
Got_Mitch's Avatar
Got_Mitch
Professional
Joined: Aug 2008
Posts: 249
Likes: 0
From: Red Deer, Alberta
Default

Ive been looking into those LED light bars. The scary part is the price, The 30 inch ones are around 800, from what Ive seen, but would look the best. And I cant think of any better ammo against those who drive with hi beams on at all times. And the guys who drive in town with there HID fogs on, to let us know they have HIDs
 
Reply



All times are GMT -4. The time now is 01:17 AM.