Got my cab lights installed
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Well, I did it myself. Took me about three and a half hours, two of those were spent on measurements. Once you drill you can't go back!
I followed this guide here to establish the locations. It's author uses Recon lights however the footprint of the lights is roughly the same, so I went with it.
I used this kit from Harbor freight: http://www.harborfreight.com/5-piece...kit-97966.html
I wired it in to turn on with the running lights.
![Got my cab lights installed-hg3ykqk.jpg](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/129077d1683063734t-got-my-cab-lights-installed-hg3ykqk.jpg)
Edit - forgot the link to the guide!
http://www.gorecon.com/download_file...ownload_key=10
I followed this guide here to establish the locations. It's author uses Recon lights however the footprint of the lights is roughly the same, so I went with it.
I used this kit from Harbor freight: http://www.harborfreight.com/5-piece...kit-97966.html
I wired it in to turn on with the running lights.
![Got my cab lights installed-hg3ykqk.jpg](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/129077d1683063734t-got-my-cab-lights-installed-hg3ykqk.jpg)
Edit - forgot the link to the guide!
http://www.gorecon.com/download_file...ownload_key=10
Last edited by Prismatic; 04-08-2013 at 03:06 AM.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
They do not. They're wired into the headlight switch, not the running lights... I found a wire that gets +12v at any position other than off, checked the fuse (15amp, interior lights) and used that. Those lights draw near nothing.
Last edited by Prismatic; 04-09-2013 at 02:35 AM.