I am curious about the parts needed to rebuild my front 8.25 ifs axle. My half shafts have play which I guess is a bearing, and I'm swapping my 3.92 out for a 4.56. Front and rear and actually where can I get new clutches for my 9.25 led rear end.

 

I rebuilt my front axle a few months ago, its an 8" btw. I got my cv shafts, intermediate shafts, and axle seals all from napa. I didnt touch the bearings, after the new parts all the slop is gone. If your regearing the rear axle either ditch the stock limited slip for an open carrier or spend a bit more and get a tru trac or auburn limited slip carrier.