Here is a picture of the 41"

 

Good lord!!!! Looks like a night time ball game. You got any pics of it mounted in the bumper? What do you use for brackets?

 

No pics installed yet. Ive still got to take my old one out and then put the new one in place. They come with mounts

 

I wanna see more about these LED bars, would be cool to throw one of those behind my grille to replace the the KC's

 

Ok, I'm on the fence here. Is this a turn key kit? What all is needed? You say they come with brackets. Are the brackets specific for 3rd gen 1500's? What about wiring? How do you have yours wired up?

 

These are not vehicle specific so neither are the mounts. They are a flat surface mount. There are companies in the market who make vehicle specific mounts.

All you need to provide is some wire to go from the (+) side of the light to a switch. The other side of the switch goes to a fuse terminal to the (+) side of your battery. The (-) wire on the bar goes to ground. Thats how i wire mine. Ho nigh amp draw so no harness or relay is needed

Current group buy on Facebook is until Feb 16th

 

So, this thread is months old, but has anyone installed one of these sort of like weed has his? I'm trying to figure out if I will have to drill holes for the mounts or can use existing holes?

Also, on the power supply and switch hookup, is there any way possible to just use the switch and power feed (harness) that I already have wired to the bumper location for the 2 KC lites I was running before? Or will it throw too much juice to the LED?

 

If it helps, here are two pics

If you look carefully (sorry, I dont have any better ones), you can see the mounts on each end. There is a single hex cap/socket/allen head bolt through each one. I had to drill a hole through the metal bumper plate to do this. It was only 1/4" hole and not big at all. If you even put tow hooks on, it would be covered as well as if you out the plastic cover back in place.