Shocks
#1
11-05-2014, 09:16 PM
Join Date: Oct 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Shocks
Owner of a 2005 Ram 4x4
Order a set of Rough Country n2.0 shocks for the front of the truck. Installed the sleeve that goes into the lower eyelet bushing of the shock (the end that mounts to the lower control arm). As i'm tightening the bolt like the manual says to 100ft/lbs of torque it start mushrooming that little insert and pushing the rubber bushing out of the shock. I'm not even getting near 100 before this start happening. Should I just snug the bolt down to the sleeve until it just start to compress?
HELP needed!!
John
Order a set of Rough Country n2.0 shocks for the front of the truck. Installed the sleeve that goes into the lower eyelet bushing of the shock (the end that mounts to the lower control arm). As i'm tightening the bolt like the manual says to 100ft/lbs of torque it start mushrooming that little insert and pushing the rubber bushing out of the shock. I'm not even getting near 100 before this start happening. Should I just snug the bolt down to the sleeve until it just start to compress?
HELP needed!!
John