Torsion Bars lowering front end
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 5
Likes: 0
Torsion Bars lowering front end
Hello all. Currently i have my 2003 Dodge ram 4x4 with the Torsion Bars Cranked up, a friend of mine did this for me. Now i need to lower the front of the truck because i ripped a Cv. Is it just turning the bolt son the torsion keys anything else i need to do besides that.Any thing else i need to know befor i start turning. thanks
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Yeah, sounds like he over cranked. About 1.5" should be max for a poor man's lift.
all ya gotta do is crank back down, but get the front wheels off the ground. With weight on the wheels, you need gorilla arms to turn em, plus you risk stripping or even snapping the bolts or damaging the keys...
all ya gotta do is crank back down, but get the front wheels off the ground. With weight on the wheels, you need gorilla arms to turn em, plus you risk stripping or even snapping the bolts or damaging the keys...