Got a dmh cutout and flowtech pipe welded in this week. I had the exhaust shop cut the pipe from the factory y to the muffler and flip it, so that I would retain the front resonator. The cutout is welded in right after the y pipe. Getting it wired in today, and should be able to comment on sound/gains. No leaks whatsoever thus far, and the truck has the same quiet stock sound with the cutout closed (need to get some power to the motor to get the cutout open.) I'll take some pics of the install if I remember, as well as the mounting location (I know you guys love pics). 200 bucks shipped for pipe and electric cutout from airram, and 40 bucks for the welding work. I plan on wiring it in to the cigarette lighter, more info after wiring is done.

 

You and your neighbors will love it, trust me.

 

pic one

[IMG]local://upfiles/38988/908D195B5B834F769CCBB47621688F8B.jpg[/IMG]

 

two

[IMG]local://upfiles/38988/45CB5F2E7DBA423D84ECA9E6E3BF497F.jpg[/IMG]

 

and lastly the mounting location for the switch. I put it where the factory pedal adjuster would have been.

[IMG]local://upfiles/38988/6B2E8A4CC91F4139992C655AFC16A1EB.jpg[/IMG]