Show Us Your 3rd Gen
Record Breaker
Joined: Mar 2008
Posts: 1,591
Likes: 0
From: Texas
so i guess you started out with a stock SRT10 and all hell broke loose from there 
lol
Did you do everything yourself?
im in beaumont which is like an hour from houston.
check out 94rt10ohio, he has sic reg cab srt10 too and hes running for TOTY
lolDid you do everything yourself?
im in beaumont which is like an hour from houston.
check out 94rt10ohio, he has sic reg cab srt10 too and hes running for TOTY
Grand Champion
Joined: Dec 2008
Posts: 6,556
Likes: 1
From: TX
Thanks lots of time and the obvious went it to it. Mods list is only as big as my monitor 
I will be resizing here shortly.
Its a few local members from another site.
Motor 6.1 based 6.4L 727 trans gearvendors overdrive and a SRT10 D60 w/4.56s.
I am Houston were you at SilverBullet08.
I will be resizing here shortly. Its a few local members from another site.
Motor 6.1 based 6.4L 727 trans gearvendors overdrive and a SRT10 D60 w/4.56s.
I am Houston were you at SilverBullet08.
Professional
Joined: Jan 2009
Posts: 116
Likes: 0
I built the interior and bought the motor trans rear end and Fabed what i needed and installed every thing.This goes to both of you not sure if its posted on this forum but there is a
Dodge meet in killen this Sat. if you interested. Its on so many different It really is just an open dodge meet.
Here is a link to some vids at the track look at my other vids if intrested
Last edited by OSO; Jan 27, 2009 at 01:01 AM.
Record Breaker
Joined: Mar 2008
Posts: 1,591
Likes: 0
From: Texas
nice vid OSO. it really captures the moment with the dual screens.
Did you do all the mods yourself at one time or just kept adding on and on as time went on.
Sorry, i thought it was a stock SRT10. that makes it even more impressive. what made you go with a stock 1500 instead of buying a SRT10. i cant imagine it being cheaper or maybe im wrong. What the original motor in the truck?
Did you do all the mods yourself at one time or just kept adding on and on as time went on.
Sorry, i thought it was a stock SRT10. that makes it even more impressive. what made you go with a stock 1500 instead of buying a SRT10. i cant imagine it being cheaper or maybe im wrong. What the original motor in the truck?
Grand Champion
Joined: Dec 2008
Posts: 6,556
Likes: 1
From: TX
Reg 1500 is what i started with and yes it seriously broke loose from there!! I built the interior and bought the motor trans rear end and Fabed what i needed and installed every thing.
This goes to both of you not sure if its posted on this forum but there is a
Dodge meet in killen this Sat. if you interested. Its on so many different It really is just an open dodge meet.
Here is a link to some vids at the track look at my other vids if intrested
FEW+WINS+AND+A+FEW+OF+THE+OTHER
I built the interior and bought the motor trans rear end and Fabed what i needed and installed every thing.This goes to both of you not sure if its posted on this forum but there is a
Dodge meet in killen this Sat. if you interested. Its on so many different It really is just an open dodge meet.
Here is a link to some vids at the track look at my other vids if intrested
also, oso do you know anybody selling the srt10 hood or where i can find a good deal on one?
Record Breaker
Joined: Mar 2008
Posts: 1,591
Likes: 0
From: Texas
the houston one because thats where im going
Professional
Joined: Jan 2009
Posts: 116
Likes: 0
You would have more fun at the meet.
I resized for everyone. i thought everyone had at least a 22 inch monitor.
Did them one by one did the drive train all at once. I could of bought a stock used srt 10 with the money i put in the drive train but then i would be the one getting smoked in the 1/4
New will run you about 600 shipped that's about. You most likely can find a used one for about 350.
nice vid OSO. it really captures the moment with the dual screens.
Did you do all the mods yourself at one time or just kept adding on and on as time went on.
Sorry, i thought it was a stock SRT10. that makes it even more impressive. what made you go with a stock 1500 instead of buying a SRT10. i cant imagine it being cheaper or maybe im wrong. What the original motor in the truck?
Did you do all the mods yourself at one time or just kept adding on and on as time went on.
Sorry, i thought it was a stock SRT10. that makes it even more impressive. what made you go with a stock 1500 instead of buying a SRT10. i cant imagine it being cheaper or maybe im wrong. What the original motor in the truck?
New will run you about 600 shipped that's about. You most likely can find a used one for about 350.
Last edited by OSO; Jan 27, 2009 at 10:58 PM.