Dont worry there will be plenty "part of the weeks" to come

 

I thought the first one was a adapter to fill up the blinker's with blinker fluid.

 

upper ball joint

 

The secondset of picturesis clearly a fine splineR2D2 BUTT Dyno Adapter Flange.

Used exclusively in the now infamous Redneck DecisiveBUTT Dyno. Where as the "2s" denote Model and Version. i.e. R2D2.

The two off set holes give it away.

Note:
Even though the adapter flanges are interchangeable the

BUTT (Built-in User Torque Test) Dyno

Should not to be confused with the

*** (Accumulated System Senses) Dyno

Both of which replaced the older Keister Dyno

 

New part! what is this??? I know that it is on all cars and thats it. That skinny cylinder protruding out of it on its side will go in and is spring loaded.

[IMG]local://upfiles/68704/85F65ECAD44A4F759F6CBB9826E33FBE.jpg[/IMG]

[IMG]local://upfiles/68704/A063ABA2FF864614BA4EEB3149676561.jpg[/IMG]

[IMG]local://upfiles/68704/A98554C6A238468CBC515577DF9B4D32.jpg[/IMG]

[IMG]local://upfiles/68704/65FF875C3BAB46788C1186E5BAF6C333.jpg[/IMG]

[IMG]local://upfiles/68704/3453F59CB70A49D58A58FC21B001CB57.jpg[/IMG]

 

looks like some kind of fitting for a brake line like splits the flow in two... or like a diverter maybe.... something along those lines of fluid driven....

 

I stumped I have no idea is there some kindatubes hook to it some where or wires hook up I can not see.

 

I got it it a Brake light plunger that hooks to you'r foot oprated brake lever in side the cab of the car or truck this sends signal to the brake lights.

Or E brake plunger.

 

Thats not a car part at all..

It'sthebottomsideof aPlayboy Bunny keychain mold.
The single leg is the plastic injection fill hole and the two holes at the top of the ears are bleed outs.

The lower legand rough edges aretrimmed off after the casting is complete.

 

keep guessing. ill try to get some more pics on monday when i go back to class