Lost a side bed rail cap
I noticed this morning while I was at the barn one of my bed rail caps blew off!!! not like a big cap put the things that go over the rails.... i am looking at deflecta black diamond plate ones to replace them... what do ya think? anyone know where to get a good price on these things??
here is what they look like:

here is what they look like:

Greg,
get a set that has the screws in addition to the 3M tape. I've got the DeeZee's and they have 3 holes in them - front, middle & back. You just drill though them and put inthe screws, which are hidden on the inside, under the lip. So if you ever take them off, the screw holes would be hidden. I just happened to walk into a Tractor Supply Co. store one day and saw them. I think the sides were $69.99 and the tail gate cap was $29.99. So I took the cheap, cheezy black plastic ones I had off (what a PIA) and put these on. Just about ANYBODY who sells truck accessories should have these.
[IMG]local://upfiles/67238/BF243CE8776B487A881CD3C516E9E4C4.jpg[/IMG]
get a set that has the screws in addition to the 3M tape. I've got the DeeZee's and they have 3 holes in them - front, middle & back. You just drill though them and put inthe screws, which are hidden on the inside, under the lip. So if you ever take them off, the screw holes would be hidden. I just happened to walk into a Tractor Supply Co. store one day and saw them. I think the sides were $69.99 and the tail gate cap was $29.99. So I took the cheap, cheezy black plastic ones I had off (what a PIA) and put these on. Just about ANYBODY who sells truck accessories should have these.
[IMG]local://upfiles/67238/BF243CE8776B487A881CD3C516E9E4C4.jpg[/IMG]
ORIGINAL: tdmopar59
i was on their site they look nice but are like 97 bucks!
i was on their site they look nice but are like 97 bucks!
I saw the same set I got up there for $69 and $29 in the TSC in Melbourne Fl., for $99 & $39 a few months after I got mine up there. That may have been regulare price up there too, as I paid no attention to the reg. price when I picked them up. But I'll tell you, mine have been great, I hit them with the same aluminum polish I use on my rims & toolbox like once every 3 months and they still look like the day I installed them.



