it's way easy....didn't come with instructions since the button came from a SRT-10 that was gonna get crushed lol....the way i did it is i got power from the Cig liter and then ran another wire to the Yellow Ign wire coming from the Stg Column. The Ign wire goes to pin 1 and the power goes to pin 5 and thats it...turn the key to run, push and hold the button for just a real quick sec and it fires right up...you can still use the key to start it as well

 

sounds pretty cool....

 

sounds exceptionally cool to me

 

Sounds extra cool to me. Where did you mount the switch? any pics yet?

 

i'm mounting the switch where the cig lighter was...no pics yet, gotta get some stuff from work tomorrow that i forgot to grab today....might beable to snap a pic real quick tho...i'll get back to ya on that

 

Would this be possible to wire up with just a simple push botton, not one out of a srt 10

 

yeah more then likely, but then it wouldnt be as cool lol...thats really the only reason for doing this is cause the coolness rating is like a 30 on a scale of 1 to 10 lol

 

ok finally got a few pics...went to take some pics like 4 hrs ago and damned camera was dead....but anyways, cam didnt wanna focus in one of the pics so it's a lil fuzzy. but it shouldn do the trick...and i kinda screwed up the trim peice because the trim piece hole wasnt big enough for the button so i had to use a dremel to open the hole up and got a lil carried away with one spot lol



[IMG]local://upfiles/20353/ACC53374D0B9453FB3ACC821C2FB7C7D.jpg[/IMG]

[IMG]local://upfiles/20353/7DC4E892672F483EAF228C7C3C7FBEC0.jpg[/IMG]

[IMG]local://upfiles/20353/928D22F289724C3BB5EC13D1ED2CD294.jpg[/IMG]

 

hmmm... pretty kool.... is it workin?

 

yeah it works like a charm...i spliced into the wires before i even thought about puttin it in the truck and it works just fine