When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 2004.5 ram short box diesel 4X4. It has 190,000km on it now and front ball joints are shot. Heres my ? I want to order MOOG (with grease fittings ) and do it myself. Question which ones do i order. There are some with different cambers on them .5, 1.5 etc... Which offset or camber do i get. I run a stock lifted truck and normal sized tires. Do a search yourself online for ball joints and youll see what i mean.[/align]
you might want to go and get an alignment check, these SHOULD be free..... and see if your camber is messed up, and by how far... this should give you a better idea of what ball joints you want....
If doing the job myself (except wheel allignment) what tools do i need? Parts? Of course ill buy the 2 upper and 2 lower ball joints but what will I need? Will I need any axle seals, Bearings etc...? Can it be done without the tool?