Debadge Phase 1
Thread Starter
|
Rookie
Joined: Jan 2008
Posts: 63
Likes: 0
From: Albany, OR
Debadge Phase 1
OK, so “phase 1” might be a stretch! I removed the SLT badge last night. It was about 30 degrees and I did not use heat.
Took me about 15 minutes with the fishing line/fingernail scrape/WD-40 method. I think I'll wait for it to warm up a bit to do the rest, IF I do.
As you can see from the pic, you can still see where the emblem was. Will this go away with a good waxing? If not, I’m not taking any more off!
If I do leave any badges, it will be the 4X4 one. It looks better already!
Took me about 15 minutes with the fishing line/fingernail scrape/WD-40 method. I think I'll wait for it to warm up a bit to do the rest, IF I do.
As you can see from the pic, you can still see where the emblem was. Will this go away with a good waxing? If not, I’m not taking any more off!
If I do leave any badges, it will be the 4X4 one. It looks better already!
Veteran
Joined: Dec 2007
Posts: 336
Likes: 0
From: Jacksonville, FL
RE: Debadge Phase 1
I did mine in about 45 min with fishing line to take the actual badge off and ggogone and a big pencil erase and then a good coat of wax.....cant even tell they were there,, i just left the HEMI's on of course...
