Has any one of you guys added a double din (in-dash) gps navigation radio to there ram... the ram has a din and a half and has to be cut to fit the double din screen.. Has anyone done this to there truck and if so can you tell that you did this... If so please attach pictures so I can see what it looks like...
Thanks for your help,
Terry

 

from what I understand you can go to the dealership and get the bezel for the factory in dash gps radio, and you are good. No semi-circles, double din, etc...

 

Do you mean use there stock radio gps navigation or just the face plate so that I can use my own double din radio...
Thanks for your help
Terry

 

The dealership can sell you the trim panel/bezel/whatever you call it that they would use if the truck came factory with the double din gps navigation. I believe it is around $150-$180 bucks. You can then use this to install any double din GPS unit. I looked into this a little while ago as I am going to be getting the new Alpine double din with removable GPS.

 

along the same line if you are an ebay fan you can get one in the neighborhood of $90 plus shipping

http://cgi.ebay.com/ebaymotors/2006-...spagenameZWDVW

 

Yep, I bought this off of eBay for $75 shipped:



It's a little bigger than 2 DIN, but there's a kit you can buy to make a 2 DIN device fit this:
Click Here