3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Autostick install?

Thread Tools
 
Search this Thread
 
Old Feb 17, 2008 | 04:35 AM
  #1  
Bill_99's Avatar
Bill_99
Thread Starter
Joined: Feb 2008
Posts: 27
Likes: 0
From: Dallas, Texas
Default Autostick install?

Noob here. Just got my first Dodge. I like it overall but sometimes I miss my manual transmission. I was looking around and found a lot of people like the autoshift on the new Charger. Anyone know if we can install one of these systems on a Ram? I would love the ability to switch back and forth between automatic and manual (sort of).
 
Reply
Old Feb 17, 2008 | 11:55 PM
  #2  
Bill_99's Avatar
Bill_99
Thread Starter
Joined: Feb 2008
Posts: 27
Likes: 0
From: Dallas, Texas
Default RE: Autostick install?

bump
 
Reply
Old Feb 18, 2008 | 11:45 AM
  #3  
stratusguy02's Avatar
stratusguy02
Professional
Joined: Mar 2006
Posts: 184
Likes: 0
From:
Default RE: Autostick install?

Why don't you just buy a truck with a manual?
 
Reply
Old Feb 18, 2008 | 03:11 PM
  #4  
TANKZ400's Avatar
TANKZ400
All Star
Joined: Jun 2007
Posts: 998
Likes: 0
From: FREDNECK, MD
Default RE: Autostick install?

Or you could buy a floor shifter i think there is a couple of guy's on here that have them
 
Reply
Old Feb 18, 2008 | 03:38 PM
  #5  
Redram05baby's Avatar
Redram05baby
Joined: Mar 2007
Posts: 1,468
Likes: 0
From:
Default RE: Autostick install?

Wow, With The Auto-Transmissions They Shift Off of Vaccum - Compaired to Early Transmissions They Now Are Computer Controlled. There Would Have To Be A Whole New Program or Interference Programmer To Install Any Sort of Electronic Shift. Unless Any Vehicle Is Set Up To Be Computer Shifted - Such As "Triptronic" Developed by Porsche. I Couldn't Imagine The Transmissions In Dodge Trucks Would Allow Electronic Shifting..

As A Fact, I Know In Performance Programmers - When You Control Your Shift Points It Is Based On The Computers Stock Programming and "Cleans Up" The Computer Contolled VaccumShift Points.
 
Reply
Old Feb 18, 2008 | 06:35 PM
  #6  
kenihemi's Avatar
kenihemi
All Star
Joined: May 2005
Posts: 946
Likes: 1
From:
Default RE: Autostick install?

The difference with an autostick and a floor or column shifter is this;

When you put an auto trans into lets say 2nd gear and come to a stop. The trans automatically goes into 1st and you cannot prevent that.

With the autostick system, if you start out in 2nd, you start out in 2nd, not first.

Doesn't look like that can be done in our trucks, yet.

Computer control is electronic control.


http://en.wikipedia.org/wiki/Autostick
 
Reply




All times are GMT -4. The time now is 05:23 PM.