3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Towing with my hemi ?

Thread Tools
 
Search this Thread
 
Old Mar 15, 2008 | 10:25 PM
  #1  
bsmith's Avatar
bsmith
Thread Starter
|
Registered User
Joined: May 2007
Posts: 16
Likes: 0
Default Towing with my hemi ?

I own a 2005 1500 4x4 with the hemi. I know the truck has lots of power and will handle the new camper I just bought, 5100 lbs. What I want to know, is about the tow/haul. Do I keep it in overdrive, or do I shift it down to 3rd. I have not pulled anything this big before with a truck with the tow/haul feature. Any info would be nice.
Thanks
 
Reply
Old Mar 15, 2008 | 10:48 PM
  #2  
tnt1036's Avatar
tnt1036
Professional
Joined: Dec 2006
Posts: 150
Likes: 0
Default RE: Towing with my hemi ?

I would say keep tow/haul on until you get it up to highway speed then turn it off(of course no hills just flat highway). Not to change your post but what did you get for a brake controller? I'm looking for the best. My advise on tow haul has not been tested by me so use at your own risk.
 
Reply
Old Mar 15, 2008 | 11:54 PM
  #3  
Tractor's Avatar
Tractor
Professional
Joined: Oct 2007
Posts: 151
Likes: 0
From:
Default RE: Towing with my hemi ?

Always use the tow-haul when towing. Also have a drain plug welded on the trans oil pan so you can drain and refill yearly. Much cheaper than a rebuild.
 
Reply
Old Mar 16, 2008 | 03:16 AM
  #4  
JD1500's Avatar
JD1500
Record Breaker
Joined: Oct 2007
Posts: 1,104
Likes: 0
From:
Default RE: Towing with my hemi ?

Yeah, keep it in tow/haul on unless your already at speed, and it is flat.

The weak link in the tranny's in 2prime, well, downshifting under high power/load into it is. Tow/Haul gives you overdrive, but gets rid of 2 prime.

Edit://

For a controller i reccomend a prodigy.
 
Reply




All times are GMT -4. The time now is 11:19 AM.