3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help 4.7L EGR valve

Old Apr 3, 2008 | 01:07 PM
  #1  
buganddoug's Avatar
buganddoug
Thread Starter
|
Professional
Joined: Jan 2008
Posts: 108
Likes: 0
From: Eastampton NJ
Default Help 4.7L EGR valve

I have a 2005 1500 4.7L with a bad EGR valve. I can see just the top of it. What is the best way at getting to it?
Any info would help Photos would help to.
 
Reply
Old Apr 3, 2008 | 09:28 PM
  #2  
buganddoug's Avatar
buganddoug
Thread Starter
|
Professional
Joined: Jan 2008
Posts: 108
Likes: 0
From: Eastampton NJ
Default RE: Help 4.7L EGR valve

Some one must know a trick or two to get this out.
 
Reply
Old Apr 7, 2008 | 09:04 PM
  #3  
chadmech28's Avatar
chadmech28
Professional
Joined: Mar 2007
Posts: 144
Likes: 0
From:
Default RE: Help 4.7L EGR valve

these egr suck to change. The only advise I can give you is make sure that you don't drop you rsocket it goes right under the intake plenium. Start the tube bolts by hand then get it mounted before you tighten it up. HAVE FUN!!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:32 PM.