3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Hid issues

Old Aug 19, 2008 | 09:56 AM
  #1  
RAM04RED's Avatar
RAM04RED
Thread Starter
|
Junior Member
Joined: Aug 2008
Posts: 2
Likes: 0
Default Hid issues

I installed a new hid kit in my 04 ram. Low beams work but the high beams turn off/on along with a lamp out indicator. I knew of this problem with low beams but not the highs. Any help would be appreciated.
 
Reply
Old Aug 19, 2008 | 12:14 PM
  #2  
kicker417's Avatar
kicker417
Veteran
Joined: May 2008
Posts: 461
Likes: 0
From: Houston,TX
Default

did you tapp in to the high beam cable
 
Reply
Old Aug 19, 2008 | 12:58 PM
  #3  
RAM04RED's Avatar
RAM04RED
Thread Starter
|
Junior Member
Joined: Aug 2008
Posts: 2
Likes: 0
Default Hid

No it was a straight plug and play kit. Not taps or anything like that. One side of the kit plugs into the main harness.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:54 PM.