3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

? for Superchips owners

Old Aug 19, 2008 | 09:29 PM
  #1  
boomer79's Avatar
boomer79
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 27
Likes: 1
Default ? for Superchips owners

I am about to fill her up with 93 and run the performance tune. Curious as to what yall have your limiter and shift points set to?
 
Reply
Old Aug 20, 2008 | 08:55 AM
  #2  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

It's been a while since I set them and I don't venture into the upper rpms much, I'm more of the low end grunt type. But I know I pegged the MPH to 140. I think I've got the rpm limiter at 6000 (Our tranny has been extensively tested with "red line" at 6200) and I believe my 1st/2nd WOT is 5900 and 2nd/3rd is 5850...
 
Reply
Old Aug 20, 2008 | 06:34 PM
  #3  
A05GSHO's Avatar
A05GSHO
Professional
Joined: Oct 2007
Posts: 115
Likes: 0
From: Saukville Wisconsin
Default

If I'm not mistaken max HP on my 07 Hemi is obtained at 5800rpm that said I set my rev limiter at 6000. Shift points I forget but 1st/2nd max was 6200 I set it at 5800, 2nd/3rd is 5850 or 5750 whichever one it was I set it at it's max. Max speed 140.

The max HP I think I found out on the flashpaq.com forum.
 

Last edited by A05GSHO; Aug 20, 2008 at 06:36 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:50 AM.