3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

New Dodge Ram Intake!

Thread Tools
 
Search this Thread
 
  #1  
Old 10-29-2008 | 05:50 PM
True Flow's Avatar
True Flow
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 15
Likes: 0
From: Phoenix, AZ
Default New Dodge Ram Intake!

True Flow Makes Bigger Even Better!
Xtreme Duty Intake for 2009 Dodge Ram Hemi 5.7L
Boasting a nearly 13% horsepower increase over its 2008 predecessor, the 2009 Dodge Ram with its hugely popular 5.7L Hemi V8 engine made bigger even better. If you are anything like the crew here at True Flow, sometimes good enough never is! We just couldn’t leave it alone and we set out to follow in the 2009 Dodge Hemi’s footsteps. We wanted to see if we really could improve the performance on this already power-hungry machine.

True Flow immediately embarked upon our “deconstructing Hemi” project. We started out by ditching the small and utilitarian-looking air box quietly resting on top of the throttle body and removed the restrictive muffler and resonator combo inside the stock intake tubing. Left with a blank canvas, we decided that beauty doesn’t always have to be skin deep either, but more on that later.

So what did the True Flow folks come up with, you ask? After extensive research on a flow bench, we determined our proprietary “Inverted Air Flow Technology™” coupled with our unique foam air filter was just what the 2009 Dodge Ram Hemi engine ordered. This revolutionary process essentially reverses the air flow from the inside-out of the filter and allows for a nearly 50% increase in air flow and an astonishing gain of up to 16 horsepower and 21 lb.-ft of torque at optimum RPM’s.

Remember that quiet and demure-looking air box? True Flow just couldn’t leave the styling alone either. We started by replacing the stock components with sleek, non-restrictive tubing, silicone couplers, and a free-flowing powder-coated aluminum canister housing the high-filtration foam filter. Combining the brains with this beauty impressed even us! The XDI Air Intake by True Flow for the 2009 Dodge Ram Hemi 5.7L V8 is an achievement that we are pleased to bring to the Hemi Truck enthusiast.

Oh! – and one last thing…We were quite surprised when we stepped on the gas for the first time with the XDI system installed. We could actually hear the sound of performance rumbling from all 390 ponies under the hood! True Flow’s XDI air intake system rivaled the sound of any aftermarket exhaust and offered up a nice throaty tone to match the 09 Ram’s new styling and performance!

2009 Dodge Ram Hemi 5.7L Hemi - Part Number - 30711
Available for Immediate Shipping!
 
  #2  
Old 10-29-2008 | 06:59 PM
uspatriot's Avatar
uspatriot
Professional
Joined: Sep 2008
Posts: 179
Likes: 0
  #3  
Old 10-30-2008 | 09:30 AM
HankL's Avatar
HankL
Champion
Joined: Aug 2005
Posts: 3,313
Likes: 8
Default

the last 20 years have taught the aftermarket that you can separate suckers from their money even if that particular customer already has large balances on their credit cards

it is a sad situation

it says something about the high school education that USA males get today
 
  #4  
Old 10-30-2008 | 12:20 PM
RubberFrog's Avatar
RubberFrog
Champion
Joined: May 2007
Posts: 2,687
Likes: 0
From: Northern Virginia
Default

Originally Posted by True Flow
This revolutionary process essentially reverses the air flow from the inside-out of the filter and allows for a nearly 50% increase in air flow and an astonishing gain of up to 16 horsepower and 21 lb.-ft of torque at optimum RPM’s.
I want air flowing into the air filter... not out of it. This sounds like snake oil
 
  #5  
Old 10-30-2008 | 12:51 PM
True Flow's Avatar
True Flow
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 15
Likes: 0
From: Phoenix, AZ
Default

If you look at the intake and the filter you will see that the air is flowing directly in and out into your engine. www.trueflow.com Most intakes are designed so the air is flowing around your filter and not into the filter.
 
  #6  
Old 10-30-2008 | 05:43 PM
DaHipaKea1313's Avatar
DaHipaKea1313
Veteran
Joined: Aug 2005
Posts: 356
Likes: 0
From: Southeast Ga. USA
Default

Hey all looking at the TRUE Flow site and for those of you ever had any experiance with The Military or with a military HUMMER/HMMWV (High Mobility Multi-Purposed Wheeled Vehicle). These look like the Air intake/Filter set up on the HUMMER. Not sure if they work any better, but it's obviously borrowing from design that has been around for a while. They do look pretty cool too
 

Last edited by DaHipaKea1313; 10-31-2008 at 01:50 PM.
  #7  
Old 10-30-2008 | 06:04 PM
dreman's Avatar
dreman
Professional
Joined: Mar 2008
Posts: 143
Likes: 0
From: Spring, Texas
Default

It looks like the same foam filter used on most Briggs and Stratton lawnmower engines for the past 30 years.
 



Quick Reply: New Dodge Ram Intake!



All times are GMT -4. The time now is 04:47 PM.