do i need a lift?
Registered User
Joined: Oct 2008
Posts: 22
Likes: 0
From: port orchard, wa
No keys needed to crank bars. Under your truck, follow the bar that goes from front suspension to about the middle of the front door on the truck. You will see the keys, the bolt under the keys that face down to the ground are what you need to crank. Make sure you lift the front of your truck off the ground. Tightening these bolts push your suspension down forcing your truck to go up. If you dont lift your truck off the ground, the weight of the truck could snap the bolt in half. I hope that was clear enuogh for you.
Rookie
Joined: Jun 2008
Posts: 74
Likes: 0
From:
a lot of the guys on here say they have squeezed 35's with just the torsion cranked. Me personally, I wouldnt do it. If they fit, you may have a bit of rubbing, but if you like to take your truck off road, your gonna rub everywhere. Just depends what youre using your truck for.
And yeah, i would definitely get an alignment.
For instance, i got of Nitto Mud Grapplers about 4 months prior to a buddy getting the exact same set. One year has gone by,and all 4 of my tires have a ton of meat on them, his front tires are basically racing slicks. He never got an alignment after leveling his truck.
Veteran
Joined: Nov 2008
Posts: 480
Likes: 0
From: edmonton, a.b
Yea get an alignmant your changing the angles of everything when u put bigger tires on, especially if you crank the torsion bars.
Im going with torsion keys and spacers to fit my 35's now
thanks for the info "TooFastForLove"
Im going with torsion keys and spacers to fit my 35's now
thanks for the info "TooFastForLove"
