since the big bois at dodge wanted to charge me 522 big ones for a single cab carpet replacement, i decided to do it myself!.. i didnt get very far. Now, i feel really stupid asking this question.. but how do you take out the front seats?? i was able to get the two front screws off, but the two in the back only twisted about full rotation before being completely locked up. i looked under the truck and saw that the backing of the screws had a weird looking cap on it, but i wasnt sure if that was just a guide for the screws. any suggestions??

 

I am also wondering about this as I ran into the same issue... Anyone have any answers?

 

IDK about SCs but I know the QCs all unbolt and lift out. Its interesting that you guys with SCs are different.

 

in my single cab, all 4 bolts are removeable from the inside, I removed the seat to install an amp.

 

I have the QC, I can get the front bolts out no problem.. but the rear ones.. I can get them up about half way.. and can't budge them at all, not even with a half inch drive and a breaker bar.. then I looked underneath, sprayed the hell out of em with PB Blaster, and still nothing. There appears to be something underneath where the bolt breaks through the floorboard.. its like a circular thing that goes around the bolt, with 3 holes on it... Are you guys telling me the bolts just come out?

 

in mine the seats are all together 8 bolts the whole thing comes out (the 2 seats and center seat)

 

Yeah, but do all 8 bolts just come out from the interior? no special tools or anything?

 

yea easy only took 10 mins or so