3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Clunking in Front End

Old Jan 5, 2009 | 02:00 PM
  #1  
glenn.d.smith's Avatar
glenn.d.smith
Thread Starter
|
Professional
Joined: Jan 2009
Posts: 100
Likes: 0
Default Clunking in Front End

HEy Guys. I have a clunking in the front end when going over bumps. THis started after I had both hubs replaced on the front. I asked the garage to check and see if anything was loose but they told me everything was fine. There are no steering symptoms and the otherwise the truck handles fine and also I have not noticed any wear of the front tires. Any ideas??
 
Reply
Old Jan 5, 2009 | 03:03 PM
  #2  
Ram1371's Avatar
Ram1371
Registered User
Joined: Jan 2009
Posts: 16
Likes: 0
Default

I had the same symptons: It was my lower ball joints.
 
Reply
Old Jan 5, 2009 | 04:02 PM
  #3  
greg14_00's Avatar
greg14_00
Professional
Joined: Oct 2007
Posts: 213
Likes: 0
From: Ontario
Default

Mine did the same thing and it was my sway bar link.
 
Reply
Old Jan 5, 2009 | 08:38 PM
  #4  
Redone4x4's Avatar
Redone4x4
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default

+1 on the sway bar link, mine comes loose on the left side only from time to time.....
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:39 AM.