3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

a/c and heat vents

Thread Tools
 
Search this Thread
 
Old Jan 12, 2009 | 06:53 PM
  #1  
02Steve1990's Avatar
02Steve1990
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 2,343
Likes: 0
From: CT
Default a/c and heat vents

whenever i use my heat or my a/c, the passenger side vents where the air bag is don't even pump air out of them. Has anyone ever had a problem with this before or does anyone know what the problem might be?

Thanks
 
Reply
Old Jan 12, 2009 | 07:43 PM
  #2  
KRZY.BMET's Avatar
KRZY.BMET
Peaceful Browser
Joined: Apr 2007
Posts: 4,960
Likes: 1
From: Miramar, Florida
Default

Common problem that i can't believe that noone chimed in on yet. It is your blend door. Mine broke already, along with about half the 3rd gen section. Mine was under warranty so I don't have a cost for you, but the dealer fixed it for me in 20 minutes.

They accessed it by dropping the glove box and reaching up along the right side of the dash to get to it. Maybe you can check to see yourself if it needs to be replaced or repaired if it is out of warranty. If it is under warranty, the dealer will just replace the whole assembly.
 
Reply
Old Jan 12, 2009 | 08:00 PM
  #3  
02Steve1990's Avatar
02Steve1990
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 2,343
Likes: 0
From: CT
Default

Alright I'll probably have to bring it to the dealer in the future but I don't think I'm under warranty anymore
 
Reply
Old Jan 12, 2009 | 08:44 PM
  #4  
draco8494's Avatar
draco8494
Captain
Joined: May 2008
Posts: 731
Likes: 0
From: Inverness
Default

wow that sucks...cant bealive i havent seen this typ of thread before hope mine doesent brake
 
Reply
Old Jan 12, 2009 | 08:47 PM
  #5  
02Steve1990's Avatar
02Steve1990
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 2,343
Likes: 0
From: CT
Default

its been like that for a while too i just figured i should probably bring some attention to it lol
 
Reply
Old Jan 14, 2009 | 03:32 PM
  #6  
paid4's Avatar
paid4
Registered User
Joined: Mar 2007
Posts: 2
Likes: 0
Default

any word on a diy or a write up on how to fix this issue i have the same deal..
 
Reply
Old Jan 14, 2009 | 04:58 PM
  #7  
draco8494's Avatar
draco8494
Captain
Joined: May 2008
Posts: 731
Likes: 0
From: Inverness
Default

well if steve here gets the part maybe he can do a DIY??? that would be pretty cool
 
Reply




All times are GMT -4. The time now is 11:15 AM.