3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

power window motor out!!!

Old Feb 1, 2009 | 04:41 PM
  #1  
04-fourseven's Avatar
04-fourseven
Thread Starter
|
Record Breaker
Joined: Oct 2008
Posts: 1,394
Likes: 0
From: Bakersfied, CA
Angry power window motor out!!!

First off, should i put this in electrical?

Next off; ever since i bought my truck, the passenger side power window has gone down slower than the rest of the windows. Finally today, it went out. Luckily the window is up, but it wont roll down, from either control. So this mean its most likely the motor, eh?

How much should this run me, and where should i get it?

suggestions? starting my research... now... bull crapola
 
Reply
Old Feb 1, 2009 | 08:50 PM
  #2  
Parts/Service's Avatar
Parts/Service
Champion
Joined: Mar 2004
Posts: 2,703
Likes: 2
From: Bremen, GA.
Default

The right regulator and motor come together. Part # 55075598AC retails for $83.35
 
Reply
Old Feb 1, 2009 | 10:56 PM
  #3  
04-fourseven's Avatar
04-fourseven
Thread Starter
|
Record Breaker
Joined: Oct 2008
Posts: 1,394
Likes: 0
From: Bakersfied, CA
Default

should i get that at the dealership, or should i take the time to find another parts distributor?

also, this is a very simple part to install right?
 
Reply
Old Feb 1, 2009 | 11:05 PM
  #4  
JohnnysArt's Avatar
JohnnysArt
All Star
Joined: Mar 2005
Posts: 764
Likes: 0
Default

My rear passenger window only rolls down half way.

johnny.
 
Reply
Old Feb 1, 2009 | 11:18 PM
  #5  
Redone4x4's Avatar
Redone4x4
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default

havent done it on the dodge, but its usually not that easy to do. very limited space to work with since it fits inside the door. I always ended up with scrapes on my arms from trying to fit inside the door and hold the motor in there while installing it...
 
Reply
Old Feb 1, 2009 | 11:45 PM
  #6  
04-fourseven's Avatar
04-fourseven
Thread Starter
|
Record Breaker
Joined: Oct 2008
Posts: 1,394
Likes: 0
From: Bakersfied, CA
Default

Originally Posted by Redone4x4
havent done it on the dodge, but its usually not that easy to do. very limited space to work with since it fits inside the door. I always ended up with scrapes on my arms from trying to fit inside the door and hold the motor in there while installing it...
hahaha... sorry im not trying to laugh at you, but i can see myself all mangled trying to do something that is so ridiculously easy to do.

When i ask about the difficulty of the roject, i just meant by the technical aspect. I can get around the edges and space issue, thats ok by me.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:10 PM.