I currently have a head unit on order and want to change the speakers in the doors of my 06 QC. How hard is it pull the door panels? Any good photos out there of what all needs to be done.
Are there clips or just the screws? Thanks... |
Originally Posted by Heavy_Sack
(Post 1585848)
I currently have a head unit on order and want to change the speakers in the doors of my 06 QC. How hard is it pull the door panels? Any good photos out there of what all needs to be done.
Are there clips or just the screws? Thanks... As for the rear panels, its just the bolt behind the door handle and two screws at the bottom of the panel i think. Then just lift all of the up and out and be sure to disconnect the wiring harnesses. |
Originally Posted by weedahoe
(Post 1586879)
On the front panels you get the big screw in the top front corner by the mirris and another one in the center of the panel. I think there are two smaller ones at the very bottom of the front panels and there is a small bolt behind the door panel. Sorry I dont remember what size it is.
As for the rear panels, its just the bolt behind the door handle and two screws at the bottom of the panel i think. Then just lift all of the up and out and be sure to disconnect the wiring harnesses. |
Originally Posted by Blaze132
(Post 3196181)
So I have the infinity system but there are no speakers in the rear but the wiring is there. Can I hook right in to the wiring and be all set?
|
All times are GMT -4. The time now is 03:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands