When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Somebody mentioned in some post they can get angel eye kits. I searched, can't find kits that might work. anyone got a link to a kit I can put on my truck?
the only reason i don't care about paying that is because i'm frustrated with trying to find a set of headlights to send in to him and now i finally found a set so i just gotta wait till i get it in the mail. But i don't really care about paying the money because i am doing good financially right now so i don't really mind, i can do the tinting and installation of the lights themselves myself or with a couple of friends one day.
Last edited by 02Steve1990; 03-20-2009 at 08:40 AM.
that's what i'm looking to do, make my own. but what do i make them from? where can i buy an 'led string'. That unique kit is waaaayyyy too much.
You use the clear mini blinds rods and heat them up to bend them in a circular or whatever other shape you want and put the LEDs in the ends. Here is a good DIY link
I bought my rods at Home Depot for about 1.80 each and a 30 pack of white 5mm 55000mcd LEDs with resistors on ebay for about $12.
You use the clear mini blinds rods and heat them up to bend them in a circular or whatever other shape you want and put the LEDs in the ends. Here is a good DIY link
I bought my rods at Home Depot for about 1.80 each and a 30 pack of white 5mm 55000mcd LEDs with resistors on ebay for about $12.
Thats a good link. Thanks. I wonder if it can be made with something else instead of the blind rod. any thoughts?