3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

04 1500 was pulling to right now have wobble?

Thread Tools
 
Search this Thread
 
Old Apr 13, 2009 | 11:11 AM
  #1  
burn66's Avatar
burn66
Thread Starter
|
Registered User
Joined: Apr 2009
Posts: 3
Likes: 0
From: Wisconsin
Default 04 1500 was pulling to right now have wobble?

I have a 2004 dodge ram 1500 with 28,000 miles on it, that was pulling to right bad. Took it in and they told me front right caliper was locking up. Had this replaced and rotors and pads. Now we have wobble so balanced tires changed tie rod ends. And alligned twice still no good. They say maybe bad tire but we did rotate from front to back with same problem. I tried to put more air in front tires and this seemed to help a little. Found that on this forum. Tires are original 20 inch Goodyears. Could it be caster angle? Its at +4.5 but was reading around +5 would cure this problem.
 

Last edited by burn66; Apr 15, 2009 at 02:17 PM.
Reply
Old Apr 13, 2009 | 11:40 AM
  #2  
dirtydog's Avatar
dirtydog
Moderate User
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Have the Tie rods and balljoints checked.
 
Reply
Old Apr 18, 2009 | 09:41 AM
  #3  
burn66's Avatar
burn66
Thread Starter
|
Registered User
Joined: Apr 2009
Posts: 3
Likes: 0
From: Wisconsin
Default

Tie rods and ball joints are good, taking in this week to try different set of wheels and tires.
 
Reply
Old Apr 18, 2009 | 10:29 AM
  #4  
Scorpio_08_HEMI's Avatar
Scorpio_08_HEMI
Rookie
Joined: Feb 2008
Posts: 81
Likes: 0
From: Texas
Default

Either the tires (belt separation) or improper balancing or both. I have dealt with the balancing issue with every major name in the business. Find a place with the newest equipment and ask for a dynamic balance or road force. Find a tech that knows what the hell he is doing.
 
Reply
Old Apr 21, 2009 | 09:10 PM
  #5  
burn66's Avatar
burn66
Thread Starter
|
Registered User
Joined: Apr 2009
Posts: 3
Likes: 0
From: Wisconsin
Default

End of problem first tire off truck had big bulge in it( belt separation) Now to find tires, or possibly going down in size to 17s. Definatly will not buy Goodyears half tread life and they are junk.
 
Reply
Old Apr 21, 2009 | 09:38 PM
  #6  
ramhunter9's Avatar
ramhunter9
Banned
Joined: Jun 2008
Posts: 5,343
Likes: 0
Default

3 post and he found his problem wow !!!!!
 
Reply




All times are GMT -4. The time now is 06:37 PM.