Whats up all. Went to get the truck aligned last week and they told me the lower ball joints and D/S outer tie rod were bad. Ordered moog ball joints and both tie rods (figured I'd replace both) and when i got them I realized they are pressed in to the lower control arms. I have a buddy who is a dodge mechanic coming over on Saturday to help me do them, but I was wondering if anyone had any tips to make the ball joint replacement go smoother. I plan on just supporting the control arm instead of loosening the torsion bars. Any tip would be greatly appreciated.

 

its really simple. just press out the old ball joint and press the new one in. autozone rents the ball joint press along with other parts stores. pretty straight forward.