3" spindle lift?
 

Im looking for a 3" spindle lift to replace my 2.5 coil spacer on my 07 2wd to try and fix that control arm from hitting the shock bucket...anyone on here know of a 3" spindle and a picture of your truck with them would be nice..

anyone?

Here a pic of mine but I have a 3'' spindle and 2'' coil lift on the front and 3'' shackle lift on the rear.

http://i374.photobucket.com/albums/o.../IMAGE_600.jpg

http://i374.photobucket.com/albums/o.../IMAGE_563.jpg

where did you get the 3" spindle from and do you think it will bring the front end of the truck up like the 2.5 spacer did but without the control arm issue?

check out rough country. got mine a few years ago for my 03 for like $500. came with 1 inch spacer for rear to level it out.

the spindles I bought from Aggie on DT. If you look at the lift spindles v/s the OEMs, they are the same length and shape wise so they don't change anything on the front end. The difference is that where the hubs mount they are 3" lower which put the truck higher. The control arms and everything else stay the same. So if you just do a spindle lift then you will level the truck.

this place had 3" spindles for the 07 2wds listed 2 weeks ago when i was looking for mine. if you contact them im sure they can get you a set.
http://cgi.ebay.com/ebaymotors/3-Lif...Q5fAccessories

I appreciate it fellas...

I want that 7'' spindle lift from CST. If I get that I will be pretty much where I want to be. ;-)

$1200 unless you can find one used on craigslist or ebay