When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Im looking for a 3" spindle lift to replace my 2.5 coil spacer on my 07 2wd to try and fix that control arm from hitting the shock bucket...anyone on here know of a 3" spindle and a picture of your truck with them would be nice..
where did you get the 3" spindle from and do you think it will bring the front end of the truck up like the 2.5 spacer did but without the control arm issue?
the spindles I bought from Aggie on DT. If you look at the lift spindles v/s the OEMs, they are the same length and shape wise so they don't change anything on the front end. The difference is that where the hubs mount they are 3" lower which put the truck higher. The control arms and everything else stay the same. So if you just do a spindle lift then you will level the truck.