3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

possible to install fold flat floor?

Old Aug 24, 2009 | 01:40 PM
  #11  
astock's Avatar
astock
Thread Starter
|
Rookie
Joined: Aug 2009
Posts: 51
Likes: 0
Default

Are you guys a bunch of douche bags? I bought the two screws for just over 5 bucks and I am called an idiot!?!?!!? They match the factory screws that are visible, they came with the washers, and were the correct size. I must be a complete moron for spending so much. Maybe I should go buy some 24" chrome wheels for my 4X4 and then I will be considered brilliant.
 
Reply
Old Aug 24, 2009 | 02:07 PM
  #12  
espinosafell's Avatar
espinosafell
Veteran
Joined: Jul 2009
Posts: 294
Likes: 0
Default

Originally Posted by astock
Are you guys a bunch of douche bags? I bought the two screws for just over 5 bucks and I am called an idiot!?!?!!? They match the factory screws that are visible, they came with the washers, and were the correct size. I must be a complete moron for spending so much. Maybe I should go buy some 24" chrome wheels for my 4X4 and then I will be considered brilliant.
People were just trying to pick on you, but besides that can you take photos of the job done or process!!
 
Reply
Old Aug 24, 2009 | 02:42 PM
  #13  
astock's Avatar
astock
Thread Starter
|
Rookie
Joined: Aug 2009
Posts: 51
Likes: 0
Default

I will take some pictures when I get home.
 
Reply
Old Aug 24, 2009 | 09:58 PM
  #14  
astock's Avatar
astock
Thread Starter
|
Rookie
Joined: Aug 2009
Posts: 51
Likes: 0
Default

Here are a couple of pics. The last picture is of the middle screws. It is hard to notice, but there is a long oval shaped cut in the carpet. The two screw holes are under there. I didn't check for the back screws because I figured the two bigger front screws will hold the floor in place. I used the floor the same day that I put it in. Who has a good idea for a carpet for the top that can be folded up with the floor?
Name:  IMG_0567.jpg
Views: 41
Size:  149.3 KB
Name:  IMG_0568.jpg
Views: 41
Size:  110.0 KB
 
Reply
Old Aug 24, 2009 | 11:00 PM
  #15  
rcman0056's Avatar
rcman0056
Professional
Joined: Jun 2009
Posts: 163
Likes: 0
From: Rhode Island
Default

Actually bolts at Lowes and Home Depot are third grade (Out of five). Dodge bolts are of a better quality. Too many go the cheap way and don't realize that L and HD bolts were tested by a 15 year old who droped it from five feet as the strength quality test over seas.
 

Last edited by rcman0056; Aug 24, 2009 at 11:03 PM.
Reply
Old Aug 25, 2009 | 01:48 AM
  #16  
hemipower05's Avatar
hemipower05
Professional
Joined: Mar 2009
Posts: 226
Likes: 0
Default

i can c him bein an idiot if he was spendin a lot of money at the dealer as opposed to goin to the hardware store and buyin wutevr but its only a couple of bucks man... lol
 
Reply
Old Aug 25, 2009 | 08:59 AM
  #17  
espinosafell's Avatar
espinosafell
Veteran
Joined: Jul 2009
Posts: 294
Likes: 0
Default

Question where can I purchase one of there? I think I'm going to call my local junkyard... I want one there had it on my last truck....

P.S Thanks for the pictures astock...
 

Last edited by espinosafell; Aug 25, 2009 at 09:00 AM. Reason: Adding more
Reply
Old Aug 25, 2009 | 11:01 AM
  #18  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

No one used the word "idiot" but himself. No one was downing him for the choice he made and I do agree with that fact he made about spending slightly more to keep it all looking uniform. That does make sense.

As for where to find or buy the flat storage trays, look on ebay, CL and even here in the forums. I had mine listed here for a long time and no one even seemed interested.
 
Reply
Old Aug 25, 2009 | 11:28 AM
  #19  
espinosafell's Avatar
espinosafell
Veteran
Joined: Jul 2009
Posts: 294
Likes: 0
Default

Originally Posted by weedahoe
No one used the word "idiot" but himself. No one was downing him for the choice he made and I do agree with that fact he made about spending slightly more to keep it all looking uniform. That does make sense.

As for where to find or buy the flat storage trays, look on ebay, CL and even here in the forums. I had mine listed here for a long time and no one even seemed interested.
Well I looked on Ebay did not find anything & if you still have your I would love to purchase it??
 
Reply
Old Aug 25, 2009 | 01:34 PM
  #20  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

I sold mine some time back on another board. Chk the classifieds on Dodge Talk or post in the WTB as I know there were a few guys trying to sell thiers. I will look also and if I find them i will PM you.
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:48 PM.