3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Quad Bi-Xenon projector retrofit setup

Thread Tools
 
Search this Thread
 
Old Nov 17, 2009 | 11:06 AM
  #81  
chadlee1261's Avatar
chadlee1261
Registered User
Joined: Nov 2009
Posts: 5
Likes: 0
From: Culpeper, VA
Default where is the..

Where is the best place to buy projector lights?
 
Reply
Old Nov 17, 2009 | 11:42 AM
  #82  
OklaHemi's Avatar
OklaHemi
Champion
Joined: Jun 2009
Posts: 3,210
Likes: 0
From: Collinsville, Oklahoma
Default

ebay.com
 
Reply
Old Nov 17, 2009 | 12:07 PM
  #83  
weedahoe's Avatar
weedahoe
Thread Starter
|
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

I would say ebay and sometimes some of the HID boards have good deals. I posted a WTB for some Acura TLs with ZKW lens that i know I can buy from retrofitsource for 240 and I ran into some a$$hole a few says ago that wanted 275. You have to watch out for idiots like that who try to take advantage of you. He was a guy with 1700+ post I have had 8 and he thought he was giving me a good deal. No thanks. I know how to price my gear and what is a fair price.
 
Reply
Old Nov 17, 2009 | 03:59 PM
  #84  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

So dump the 2.5's on ebay. Their worth what...$90-100? then fork up another $80 that you would pay for clear lenses and buy a set of spankin new fx-r's for $180 off TRS that have the clear lens adnd bi-xenon motor already. it's the same amount in the end. Then you could use those for low/high and the other set as highs????
 
Reply
Old Nov 20, 2009 | 09:49 PM
  #85  
Frenchy's Avatar
Frenchy
Banned
Joined: Dec 2003
Posts: 0
Likes: 1
Default

I'm only doing one hid now, single e55 bi-xenon, and leaving the regullar amber bulb there...
 
Reply
Old Nov 27, 2009 | 06:29 AM
  #86  
4matty3's Avatar
4matty3
Captain
Joined: May 2009
Posts: 607
Likes: 0
From: PA
Default

how much do you charge for these weed? if i provide headlights. i found a pair for sale for $550 just single retro tho. i would buy it but not sure it seems a lil high.
 
Reply
Old Nov 27, 2009 | 09:52 AM
  #87  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Originally Posted by 4matty3
how much do you charge for these weed? if i provide headlights. i found a pair for sale for $550 just single retro tho. i would buy it but not sure it seems a lil high.

You gotta think of the product expense as well. I spent $500 just for materials alone, but i did buy all OEM quality. Your still talking $300 or so for bare bones on the supplies and then the labor cost.$550 is not a bad price, just as long as your not getting super cheap HID kit and bulbs to go with.

It is alot of work and Very time consuming and I'm actually surprised shops only charge as little as they do for these retro fits.
 
Reply
Old Nov 27, 2009 | 10:46 AM
  #88  
weedahoe's Avatar
weedahoe
Thread Starter
|
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Good questions and points made. Like Dogg said, material is costly. My labor is cheap I think but in the end the price of 500ish total is about right.

I did a set for and guy and his 05 about a week ago and Im doing a set for a guy now and he has an 07.

In both cases I only charged 200.

Projectors can start at 100 and go up to 240 depending on what you want.
HID kits can start at 75 and go up to 180ish
Shrouds are around 50ish
Halos are cheap, Oracles are insanely priced

If you need new headlights to work on while you are driving your truck then thats another cost to consider although you can sell your originals when you get the retrofits done.

Because of all my other projects going on is why I havent finished mine. Im supposed to be started my Sidewinder install today.
 
Reply
Old Nov 27, 2009 | 01:23 PM
  #89  
Frenchy's Avatar
Frenchy
Banned
Joined: Dec 2003
Posts: 0
Likes: 1
Default

f'in gay
 
Reply
Old Nov 27, 2009 | 01:58 PM
  #90  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Originally Posted by Frenchy
f'in gay

where did this come from?
 
Reply



All times are GMT -4. The time now is 07:05 PM.